top of page
Office Hallway

OUR SERVICES

Jürgen Reindl Group stands for Service with Quality

Products/Services: Products

POSITIVE MATERIAL IDENTIFICATION (PMI)

  • Mostly used during receiving inspection of raw material, positive material identification or commonly referred to as PMI is used to analyse and identify metallic alloy to establish composition by reading the quantities by percentage of its constituent elements.

  • The specimen is subjected to typically two types of methods namely X-ray fluorescence (XRF) or Optical Emission Spectrometry.

  • Personnel of Juergen Reindl ILB Pte Ltd. is NEA L5 License holder authorized to perform PMI inspection.

รูปภาพ1.jpg

ULTRASONIC TESTING (UT)

The ultrasonic testing are used to find inhomogeneities both in the entire cross-section and on the surfaces of test objects made of sound-conducting materials. The location, shape and size of the inhomogeneities can also be determined.

รูปภาพ2.png

ULTRASONIC THICKNESS GAUGE (UTG)

The test specimen wall thicknesses and material parameters can be measured using ultrasonic technology thickness gauge.

รูปภาพ4.png

VISUAL TESTING  (VT)

A visual inspection is the process of locating and evaluating surface-related quality features such as shape deviations, surface properties of a product with the human eye. (Direct visual inspection with or without tools such as Magnifying glass) or using tools such as Videoscope (indirect visual inspection).

รูปภาพ5.jpg

LIQUID PENETRANT TESTING (PT)

With Liquid Penetrant testing, inhomogeneity that is open to the surface can be detected.

รูปภาพ6.png

MAGNETIC PARTICLE TESTING (MT)

Magnetic particle testing is a method for detecting cracks in or near the surface of ferromagnetic materials.

รูปภาพ7.png

EDDY-CURRENT TESTING (ET)

The eddy current testing can be used as a method for the detection of surface and near-surface defects in all electrically conductive materials. We can perform high frequency, low frequency, conductivity, coating thickness, tube corrosion testing etc.

รูปภาพ8.jpg

ONE-STOP SERVICES

  • Perform on-site inspections at your facility or on aircraft.

  • Provide relevant support as a Contracted Level 3 Inspector.

  • Conduct training, certification and re-certification for the NDT-employees in your company.

  • Provide support to conduct internal and external NDT audits in aerospace sectors and industrial – suppliers.

  • Provide support in preparation of procedural instructions and test documents.

  • Provide NDT technical consultation advice.

Ek8JWabVkAUmKTy (1).jpg
bottom of page